Table of Contents
Advertisement
SAFETY
2.1 SAFETY INSTRUCTIONS
INSTRUCTIONS FOR USE
Open the lock, lift the harness by the catch hook (C), the blue
straps (leg straps J) are below. The harness is being put on just
like a jacket. Pull the belly strap (E) through the lock, as shown on
the illustration, and secure it.
By closing the breast strap, you avoid the shoulder straps to side-
slip. Bring the leg straps (J) around the legs to the front, pull them
in, as shown in the illustration, and tighten them. Adapt the har-
ness to body form, seeing to perfect fit, in particular that the
catching hook (C) be in the center of the back.
The safety harness should belong to its wearer personally.
The safety harness should only be used together with connectors
acc. to EN 354, and fall arrest acc. to EN 355, or fall protection
devices acc. to EN 360.
The attachment point for the safety harness should be above the
wearer, and the carrying capacity of the attachment point should
be sufficient to correspond with the minimum carrying capacity
acc. to EN 795.
31
Advertisement
Table of Contents
