Table of Contents
Advertisement
OPERATION
Menu Control with Key Switch (C) and Key Group (D)
Display of Menu Options, see Menu Control Chart I (Z23063)
EXAMPLE: Display of TRUCK COUNTER READING, starting
from basic display on level -0-
Proceed as follows:
1. Press the "QUI" key (10), the menu level -1- with the current
truck counter reading appears on the display.
2. If you want to reset the counter, press the "QUI" key (10)
again. Menu level -2- appears on display. Use key (12) for
setting the counter to zero.
3. Press "RET" key (9) twice for return to the standard display,
level -0-.
EXAMPLE: Display of LUBRICATION SYSTEMS CYCLE
COUNTER READINGS, starting from basic display on level -0-
Proceed as follows:
1. Press the "QUI" key (10), the menu level -1- with the starting
item truck counter reading appears on the display.
2. Press key (12) once the Central lubrication system cycle
counter reading appears on display. By pressing key (12)
again the swing ring gear cycle counter reading is displayed.
3. For returning to the standard display level -0- press "RET" key
(9).
REMARK
Changing of the lubrication cycle counter settings can be car-
ried out in the main group SERVICE under the section *SET-
TINGS*, see also menu control chart II.
EXAMPLE: Display of Service *POWER CHECK* starting from
basic display on level -0-
1. Press the "QUI" key (10), the menu level -1- with the starting
item truck counter reading appears on the display.
2. Press key (12) three times the menu item *SERVICE*
appears on the display.
3. Press the "QUI" key (10), Service *LANGUAGE* appears.
4. Press key (12) once the menu item Service *POWER
CHECK* appears on the display.
5. Press the "QUI" key (10), the menu level -3- with the starting
item Power check *DISPLAY* appears on the screen.
Continue according to description on next page, menu control
chart II.
3.4 ELECTRONIC MONITORING AND CONTROL SYSTEM ECS
127
Advertisement
Table of Contents
