Table of Contents
Advertisement
OPERATION
Fault No. 920:
(923)
Help:
Fault No. 926:
(929)
Help:
Fault No. 932:
(935)
Help:
Fault No. 938:
(941)
Help:
Fault No. 944:
(947)
Help:
Fault No. 950:
(953)
Help:
Fault No. 956:
(959)
Help:
3.4 ELECTRONIC MONITORING AND CONTROL SYSTEM ECS
$h:
Faulty monitor channel for oil temperature of PTO
gear 2
Temperature sensor B49-2 for PTO gear oil shows inad-
missible values.
- Check sensor and cables.
$h:
Oil temperature of PTO gear 2 too high
- Check gear oil cooling circuit.
- Clean gear oil cooler.
$h:
Faulty monitor channel for fuel level
Pressure transducer B63 for fuel level shows inadmissible
values.
- Check monitor channel and transducer.
$h:
Hydraulic oil temperature too high.
Bucket motion switched off.
Cool off the oil by moving attachment w/o load.
- Check hydraulic oil cooling system.
- Clean oil cooler.
$h:
Faulty monitor channel for oil temperature of PTO
gear 1
Temperature sensor B49-1 for PTO gear oil shows inad-
missible values.
- Check sensor and cables.
$h:
Oil temperature of PTO gear 1 too high
- Check gear oil cooling circuit.
- Clean gear oil cooler.
$h:
Faulty monitor channel for ambient temperature
Temperature sensor B90 for ambient temperature shows
inadmissible values.
- Check sensor and cables.
179
Advertisement
Table of Contents
