Lesson 25: Temperature And Humidity Monitoring - Elecrow Raspberry Pi & Arduino Starter Kit User Manual

Application effect
The LCD will show "hello world" message, you can interrupt the script by pressing CTRL+C or CTRL+Z
LESSON 26: TEMPERATURE AND HUMIDITY MONITORING
Introduction
This is a more complex experiment, it can show the monitoring of indoor temperature and humidity, and in the LCD
above display value.
As we showed "hello world" in our previous lesson we are going to take this lesson one step further and show real
time data from the DHT11 sensor, after completing this lesson you'll be able to understand how to show any type of
message on the LCD monitor and so accomplish many other projects related to the same module.
110 of 114