Supervisor level
Programme pack-
ages
Sort programmes
Moving pro-
grammes
Prog. colour al-
location
Expert code
68
The selection of programmes can be expanded by activating single
programmes from the target group programme packages.
The programmes selected from the programme packages (marked in
orange) are displayed under programme selection.
Programmes can be moved within the programme list and in the Fa-
vourites list.
Factory default: off
Touch the sensor control for the programme you want to move.
Press and hold the sensor control until the frame changes.
Drag the programme to the required place.
You can assign a colour to a Favourite programme. In the list of Fa-
vourites, each Favourite programme is given a coloured frame,
which can be adjusted.
Factory default: on
A code has to be entered to cancel a disinfection programme. The
code can be modified.
The code is: 0 0 0
Make a note of your new code if you ever change it.