Table of Contents
Advertisement
Starting a programme
Touch the flashing Start/Add laundry
sensor.
The door will lock and the programme
will start.
If a Delay start time has been selected,
this counts down in the time display. At
the end of the Delay start time or
immediately after the programme has
started (if no Delay start time has been
selected), the programme duration will
appear in the time display.
Energy savings
After 10 minutes, the indicators will dim.
The Start/Add laundry sensor flashes
slowly.
You can reactivate the indicators:
Touch the Start/Add laundry sensor
(this does not have any effect on a
running programme).
6. Starting the programme
Adding or removing laundry
during a programme sequence
(AddLoad)
Laundry can be added or removed at
any time, provided that the symbol
is not illuminated in the control panel.
Touch the Start/Add laundry sensor.
Rotating bars ... ... are
shown in the time display.
If the word appears in the time
display, the door can be opened.
Open the door and add or remove
laundry.
Close the door.
Touch the Start/Add laundry sensor.
The wash programme will continue.
Laundry cannot usually be added or
removed if:
- The suds temperature is above 55°C
- The water inside the drum is above a
certain level
29
Advertisement
Table of Contents
