SpectraLink DECT Server 2500 Installation Manual page 19
Hide thumbs
Also See for DECT Server 2500:
- Manual (3 pages) ,
- Synchronization and deployment manual (36 pages) ,
- Interoperability manual (31 pages)
Table of Contents
Advertisement
Spectralink DECT Server 2500 Installation Guide
3
Unplug all interface cables on the card.
4
Remove the cables from the opening in the plastic front.
5
With two hands, gently pull out the card.
6
Gently slide the new card into the unit. Give it gentle push on the last centimeter so that it
enters the backplane connector properly. Avoid pushing on the front connectors, push only on
the plastic parts at the top and bottom.
7
Plug the interface cables into the card.
8
Connect power and reboot the unit.
Replacing the Backplane
The backplane cannot be replaced on-site. The Spectralink DECT Server 2500 will have to be
returned for repair or be replaced with a new one. If a new Spectralink DECT Server 2500 is to be
installed, you can move the cards from the faulty Spectralink DECT Server 2500 to the new one.
14205700 Version 9.0
June, 2015
17
Advertisement
Table of Contents
Need help?
Do you have a question about the DECT Server 2500 and is the answer not in the manual?