Connecting - Siemens SIMATIC ET 200SP Manual

BusAdapter BA 2xM12

6.2 Connecting

6.2 Connecting
Installing the bus connector
NOTE
Push-pull connector
For simplifying installation (only plugging in instead of screwing with a defined torque), we
recommend using the push-pull plug for the PROFINET connection.
Tools required
3 to 3.5 mm screwdriver, alternatively TX10 (torx).
Accessories required
• Push-pull version:
– Unlatching straps (6ES7193-6DL00-2AA0)
• M12 connecting cables with push-pull connection system:
– M12 connecting cable 0.5 m (6XV1 871-8AE50)
– M12 connecting cable 1.0 m (6XV1 871-8AH10)
– M12 connecting cable 1.5 m (6XV1 871-8AH15)
– M12 connecting cable 2.0 m (6XV1 871-8AH20)
– M12 connecting cable 3.0 m (6XV1 871-8AH30)
– M12 connecting cable 5.0 m (6XV1 871-8AH50)
– M12 connecting cable 10.0 m (6XV1 871-8AN10)
– M12 connecting cable 15.0 m (6XV1 871-8AN15)
• Siemens pre-assembled connector/cable M12 D-coded without push/pull up to a
maximum length of 15 m:
– IE Connecting Cable M12-180/M12-180 0.3M (6XV1870-8A E30)
– IE Connecting Cable M12-180/M12-180 0.5M (6XV1870-8A E50)
– IE Connecting Cable M12-180/M12-180 1M (6XV1870-8A H10)
– IE Connecting Cable M12-180/M12-180 1.5M (6XV1870-8A H20)
– IE Connecting Cable M12-180/M12-180 2M (6XV1870-8A H30)
– IE Connecting Cable M12-180/M12-180 3M (6XV1870-8A H30)
– IE Connecting Cable M12-180/M12-180 5M (6XV1870-8A H50)
– IE Connecting Cable M12-180/M12-180 10M (6XV1870-8A N10)
– IE Connecting Cable M12-180/M12-180 15M (6XV1870-8A N15)
28
Equipment Manual, 10/2022, A5E41449003-AC
BusAdapter