4. Insert the unstripped single cores of the PROFINET connecting cable (4b) into the cable
routing as far as it will go (4a). Firmly press down the wire guide as far as it will go (4c).
Please refer to the color coding.
③
④
5. Close the cover of the connection element (5a). Then push the locking slide forwards as
far as it will go (5b).
6. Screw the BusAdapter BA 2×FC to the PROFINET device (1 screw with 0.25 Nm tightening
torque). To do this, use a screwdriver with a 3 to 3.5 mm blade, alternatively TX10.
BusAdapter
Equipment Manual, 10/2022, A5E41449003-AC
Shield contact
Connecting cable
BusAdapter BA 2xFC
5.2 Connecting
23