Siemens SIMATIC ET 200SP Manual page 37

BusAdapter BA 2×SCRJ installed
①
②
③
Figure 7-2 BusAdapter BA 2×SCRJ connected to interface module (using ET 200SP interface module as
an example)
Reusing used fiber-optic cables
NOTE
Shorten both fiber-optic cores by the damaged lengths and reassemble the connectors. This
will prevent any attenuation losses due to the heavily stressed portions of the fiber-optic
cores.
Reference
For more information on the installation guidelines for fiber-optic cables, refer to the SIMATIC
NET PROFIBUS Network Manual
(https://support.industry.siemens.com/cs/de/de/view/1172302).
BusAdapter
Equipment Manual, 10/2022, A5E41449003-AC
Interface module
BusAdapter BA 2xSCRJ
Industrial Ethernet/PROFINET connecting cable (FOC)
BusAdapter BA 2xSCRJ
7.2 Connecting
37