Table of Contents
Advertisement
U3025AE10
PNA Multiport Mode with Option 551
The PNA Multiport Mode selects the test set file that will enable the PNA to control the
test set. The PNA Multiport Mode allows you to complete a N-Port calibration using the
Cal Wizard application in the PNA. Refer to the PNA Help system for more information.
12-Port System with E8363/4C and N5230C
The E8363/4C and N5230C Option 551 must be installed for Multiport capability. You may
access the multiport application by using the touch screen. Select Utility > System >
Configure > Multiport Capability, or use the front panel and select [System] > Configure >
Multiport Capability.
Figure 25
System Configuration
Select U3025AE10 from the test set drop-down menu and select Restart as a Multiport
PNA with this test set. Press OK. The PNA will restart the network application with the
U3025AE10 Multiport Test Set interface features.
Figure 26
U3025AE10 Selection
30
Controlling the System with E8363/4C and N5230C
User's Guide
Advertisement
Table of Contents
