Table of Contents
Advertisement
U3025AE10
Trace Measure S-Parameter
S-Parameter selection can be accomplished using Response Measure menu. Select TRACE
> Measure. Use the drop-down menus to select 1 of 144 S-Parameters for the 12-Port
system, see
Figure
30. The first number in the Sxx selection is the Receiver Port and the
second number will be the Source Port. Any port can be selected to be the Receiver, Source
or both, as in S11. The front panel R LED indicates the port is the Receiver and the S LED
indicates the port is the Source.
Figure 30
12-Port Trace Measure
New Trace Measure S-Parameter
S-Parameter Tab: Multiple S-Parameters can be made from the New Measurement
menu. In the drop-down menu select Trace > New Trace. The New Measurement window
allows the selection of any of the 144 S-Parameter's. See
page
34.
Selecting PNA New Trace Measure
Figure 31
User's Guide
Controlling the System with E8363/4C and N5230C
Figure 31
and
Figure 32 on
33
Advertisement
Table of Contents
