Warnings - Agilent Technologies U3025AE10 User Manual

U3025AE10

Warnings

WARNING The WARNING notice denotes a hazard. It calls attention to a
procedure, practice, or the like, which if not correctly performed or
adhered to, could result in personal injury. Do not proceed beyond a
WARNING notice until the indicated conditions are fully understood
and met.
Warnings applicable to this instrument are:
WARNING To prevent electrical shock, disconnect the
U3025AE10
slightly dampened with water to clean the external case parts. Do
not attempt to clean internally.
For continued protection against fire hazard replace line fuse only
WARNING
with same type and rating:• Fuse 5A/250V, Part Number 2110-0709
The use of other fuses or material is prohibited.
This is a Safety Class I product (provided with a protective earthing
WARNING
ground incorporated in the power cord). The mains plug shall be
inserted only into a socket outlet provided with a protective earth
contact. Any interruption of the protective conductor, inside or
outside the instrument, is likely to make the instrument dangerous.
Intentional interruption is prohibited.
WARNING
No operator serviceable parts inside. Refer servicing to qualified personnel.
To prevent electrical shock do not remove covers.
The opening of covers or removal of parts is likely to expose
WARNING
dangerous voltages. Disconnect the instrument from all voltage
sources while it is being opened.
WARNING If this product is not used as specified, the protection provided by
the equipment could be impaired. This product must be used in a
normal condition (in which all means for protection are intact) only.
WARNING The detachable power cord is the instrument disconnecting device.
It disconnects the mains circuits from the mains supply before other
parts of the instrument. The front panel switch is only a standby
switch and is not a LINE switch (disconnecting device).
62
from the mains before cleaning. Use a dry cloth or one
Safety and Regulatory Information
Agilent Technologies
User's Guide