BURNER CONNECTION TO THE BOILER
HEAD UNIT ASSEMBLY
•
Adjust the position of the coupling flange (19) by loosening the
screws (6) so that the burner head enters the furnace to the
extent recommended by the generator manufacturer.
•
Position the insulating gasket (13) on the sleeve, by inserting the
cord (2) between the flange and the gasket.
•
Anchor the flange of the head unit (15) to the boiler (1) with the
stud bolts, washers and nuts provided (7)
CAUTION / WARNINGS
Completely seal the space between the burner sleeve and
the hole in the refractory material inside the boiler door with
suitable material.
ASSEMBLING THE GAS TRAIN
The gas train can be assembled in different ways: (8), (8a) .
Choose the most rational position for the set-up of the boiler room and
the position in which the gas pipe arrives.
11 / 32
0006160085_202304
ENGLISH