Scanning Does Not Start - Ricoh fi-70F Operator's Manual

Scanning Does Not Start

Check the following points
● Did you unlock the transport lock switch? (page 45)
Is the USB cable connected properly? (page 45)
●
Is the connector on the USB cable broken or damaged? (page 45)
●
If the problem still persists, check each item in
Provider (page 54)
product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.
●
Did you unlock the transport lock switch?
Solution
Turn off the scanner, and unlock the transport lock switch.
For details about how to turn off the scanner, refer to
For details about unlocking the transport lock switch, refer to Getting Started.
●
Is the USB cable connected properly?
Solution
Connect the USB cable properly.
For details, refer to Getting Started.
●
Is the connector on the USB cable broken or damaged?
Solution
Use a new USB cable and connect it properly.
first, then contact the distributor/dealer where you purchased this
45
Before You Contact the Scanner Service
How to Turn the Power OFF (page
Troubleshooting
20).