Cleaning The Outside Of The Scanner - Ricoh fi-70F Operator's Manual

Cleaning the Outside of the Scanner

The scanner should be cleaned with either a piece of dry cloth, a cloth moistened with Cleaner F1/
mild detergent, or a sheet of Cleaning Wipe.
ATTENTION
● To avoid deformation and discoloration, never use paint thinner or any other organic solvents.
● Be careful not to let any moisture or water inside the scanner during cleaning.
● It may take a long time to dry if an excessive amount of Cleaner F1/mild detergent is used. Use
only a small amount. Wipe off the cleaner completely to leave no residue on the cleaned parts.
37
Daily Care