Basic Operations
This section explains how to operate the scanner.
Turning the Power ON/OFF
This section explains how to power on/off the scanner.
How to Turn the Power ON
Normally, when the following cables are connected, the scanner is turned on/off in sync with the
computer's power.
● Connect the USB cable to a USB port on the computer.
● Connect the power cable to the AC outlet or the USB bus power cable to a USB port on the
computer
When the computer is turned on, the scanner is turned on and the power LED lights in green.
ATTENTION
● If the scanner is not turned on when the computer is turned on, press the [Power] or [Scan]
button to turn on the scanner.
19