Table of Contents
Advertisement
Setting Items
The Software Operation Panel can be used to configure the settings for scanning documents for
the scanner connected to the computer.
The following lists are used for configuration.
● [Device Setting]
Can be used to set the scanner to count the number of sheets scanned or to set the scanner to
power saving mode. You can also configure settings for managing the power of a scanner.
Device Setting
1
Start up the Software Operation Panel.
For details, refer to
2
From the list, select [Device Setting].
Items that can be configured in this window are as follows:
Setting Item
Count
(Checking)
Starting Up the Software Operation Panel (page
Description
Displays the approximate total number of sheets
scanned on the flatbed.
70
Scanner Settings (Software Operation Panel)
57).
Advertisement
Table of Contents
