The Quality Of A Scanned Image Of A Picture Or Photo Is Poor - Ricoh fi-70F Operator's Manual

The Quality of a Scanned Image of a Picture or Photo Is Poor

Check the following points
● Did you configure the settings in the scanner driver to scan in black & white mode? (page
47)
● Are the document pad and the document bed clean? (page 47)
If the problem still persists, check each item in
Provider (page 54)
product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.
●
Did you configure the settings in the scanner driver to scan in black & white mode?
Solution
Use a scanner driver to configure the scan settings that do not "binarize" (output in black and
white), and then perform a scan.
The scanned image may differ from the original image significantly if you simply "binarize"
(output in black & white) a picture or a photo.
●
Are the document pad and the document bed clean?
Solution
Clean the dirty parts.
For details, refer to
first, then contact the distributor/dealer where you purchased this
Cleaning the Inside of the Scanner (page
47
Before You Contact the Scanner Service
38).
Troubleshooting