Table of Contents
Advertisement
ESD Warning
REVISION HISTORY
Revision
Date
0.00
2019-04-01
0.01
2019-05-17
0.02
2019-08-26
0.03
2019-09-24
0.04
2021-06-17
0.05
2022-12-01
Document: CTIM-00504
Revision: 0.05
Electronic components and circuits are sensitive to
ElectroStatic Discharge (ESD). When handling any
circuit board assemblies including Connect Tech
COM Express carrier assemblies, it is recommended
that ESD safety precautions be observed. ESD safe
best practices include, but are not limited to:
•
Leaving circuit boards in their antistatic
packaging until they are ready to be installed.
•
Using a grounded wrist strap when handling
circuit boards, at a minimum you should touch a
grounded metal object to dissipate any static
charge that may be present on you.
•
Only handling circuit boards in ESD safe areas,
which may include ESD floor and table mats,
wrist strap stations and ESD safe lab coats.
•
Avoiding handling circuit boards in carpeted
areas.
•
Try to handle the board by the edges, avoiding
contact with components.
Initial Release
Updated with assembly drawings, board photos, connector details
and detailed feature descriptions
Added power consumption numbers, RTC connector section, LED
summary, standoff thread sizes for M.2, camera expansion screw
size, and corrected P12 pinout.
Corrected max voltage input
Updated Template & Address, Updated Fan Connector (12V),
Updated XHG306 3D Model Images, Updated Misc. I/O Connector
Added note on 5V fan connector removal on AGX111
Page 6 of 38
Rogue – NVIDIA® Jetson AGX Xavier™ Carrier
www.connecttech.com
Changes
Date: 2022-12-01
Users Guide
Advertisement
Table of Contents
