Usb 3.1 Type C; Rtc Battery - Connect Tech Rogue AGX101 User Manual

USB 3.1 Type C

Function USB 3.1 device ports
Location J4A, J4B
Type 24 Pin USB Type C
Connector Part Number: 632723300011
Manufacturer: Wurth
Mating Any Standard Type C interface cable or
Connector device
** Note this port only supports USB
devices, it will not work as a display
interface **
Notes These interfaces are both standard DFP (Downward facing port) USB 3.1 Gen 2 capable
ports used to support USB peripheral devices. Display devices or devices requiring 20V
power modes are NOT supported.
These ports are capable up to USB 3.1 Gen 2 (10G) speeds in normal operation.
Note that only any 2 interfaces can be used at 10Gbps simultaneously.
The power available from either of these ports is 3A @5V. However
loaded at up to 3A at a time. Both will support simultaneous 1.5A loads. Overloading both
of these ports will result in system power overload and the Rogue will shut down
prematurely.

RTC Battery

The Rogue allows for an external RTC battery to be connected. This battery should be a 3V DC battery,
and it will hold settings including date and time. For further information about RTC battery selection and
life time estimation, see Application Note 00009: https://connecttech.com/pdf/CTIN-00009.pdf
Function
Location P7
Type 3 pin PicoBlade (vertical)
Connector PN 53047-0310 - Manufacturer: Molex
Mating PN 51021-0300 - Manufacturer: Molex
Pinout Pin Signal
1 +3V
2 NC
3 GND
Document: CTIM-00504
Revision: 0.05
RTC Battery Connector
Description
RTC Battery Voltage
Input
No Connect
Ground/Return
Page 22 of 38
Rogue – NVIDIA® Jetson AGX Xavier™ Carrier
www.connecttech.com
ONLY ONE port can be
Date: 2022-12-01
Users Guide