Turning On The Strip Expiration Date Indicator - i-SENS CareSens Dual User Manual

Turning on the Strip Expiration Date Indicator

Step 11
This mode allows you to turn the strip expiration date indicator on
or off. This mode turns the function on or off only. See page 29 to
set the strip expiration date.
When 'EP' appears on the screen, press the
screen will display 'On' or 'OFF'. Press the
the setting.
If you do not want to set the indicator, press the
the screen displays 'OFF'.
Note:
If the pre-set expiration date
expires, the meter will display
'EP' when the test strip is
inserted. 'EP' shows alternately
also when the test result is
displayed right after the test.
If the expiration date is set to
October of 2024, the meter
will display 'EP' at the start of
November, 2024.
26 www.i-sens.com
or button. The
◀ ▶
S
button to confirm
S
button while