Control Solution Testing - i-SENS CareSens Dual User Manual

Control Solution Testing

Step 1 Inserting Test Strip
Insert a test strip into the meter's test strip port,
with the contact bars facing upwards.
Gently push the test strip into the port until the
meter beeps. Be careful not to bend the strip
while pushing it in.
The symbol will show up. 'KETONE' will
be displayed on the screen if you insert the
KetoSens test strip.
Step 2 Activating Control Solution Test Mode
Press and hold the
for 3 seconds to activate the
Control Solution Test Mode. This
will also flag the control solution
test result. To undo the control
solution flag, press and hold the
button for another 3 seconds.
▶
Step 3 Applying Control Solution to Test Strip
Shake the bottle before each
test.
Remove the cap and squeeze
the bottle to discard the
first drop. Then wipe the tip
with a clean tissue or cloth.
Dispense a drop of control
solution onto a clean non-absorbent surface. It helps to squeeze a
drop onto the top of the cap as shown. After the
on the display, apply the solution to the narrow edge of the test
strip until the meter beeps. Make sure the confirmation window fills
completely.
32 www.i-sens.com
button
▶
symbol appears