Front Bezel - HP Proliant ML150 G6 Maintenance And Service Manual

To reinstall the access panel:
Use both hands to place the access panel flat against the chassis, the back of the access panel
1.
extending about 1.3 cm (0.5 in) behind the back of the server. Make sure the stand-off on the
access panel align with the holes on the edges of the chassis.
Slide the panel toward the front of the chassis to position it into place.
2.
Tighten the captive thumbscrews to secure the panel.
3.
Figure 3-2 Reinstalling the access panel
End of procedure.

Front bezel

To open or remove the front bezel:
If necessary, unlock the front bezel door using the supplied key.
1.
Open the bezel door to the right and lift up to remove it.
2.
Figure 3-3 Opening the front bezel
All manuals and user guides at all-guides.com
Removal and replacement procedures 29