Removing The Front Bezel; Figure 2-1 Removing The Front Bezel - HP Integrity rx4640 Upgrade Manual

Removing the Front Bezel

The server does not have to be turned off to remove the front bezel.
Opening the control panel door provides access to the following components:
• Power switch
• System LEDs
To remove the front bezel, perform the following steps:
Step 1. Grasp the front bezel at the outer edges and pull straight out.
Figure 2-1 Removing the Front Bezel
Chapter 2
Converting SCSI Configuration from Simplex to Duplex
Removing the Front Bezel
11