Remove the power converter module.
4.
To replace the component, reverse the removal procedure.
Power converter module retainer
To remove the component:
Power down the server blade (on page 28).
1.
Remove the server blade (on page 28).
2.
Remove the access panel
3.
WARNING:
internal system components to cool before touching them.
Remove the power converter module retainer. Retain the T-15 Torx screwdriver for future use.
4.
To replace the component, reverse the removal procedure.
All manuals and user guides at all-guides.com
("Access
panel" on page 29).
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Removal and replacement procedures 48