CAUTION:
or the enclosure unless all hard drive and device bays are populated with either a component
or a blank.
Remove the component as indicated.
To replace the component, reverse the removal procedure.
Hard drive
To remove the component:
Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations
1.
SATA hard drive LED
Back up all server data on the hard drive.
2.
Remove the hard drive.
3.
All manuals and user guides at all-guides.com
To prevent improper cooling and thermal damage, do not operate the server blade
combinations" on page 74).
Removal and replacement procedures 30
("SAS and