Remove the battery.
5.
IMPORTANT:
configuration. After replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure.
Power converter module
To remove the component:
Power down the server blade (on page 28).
1.
Remove the server blade (on page 28).
2.
Remove the access panel
3.
WARNING:
internal system components to cool before touching them.
All manuals and user guides at all-guides.com
Replacing the system board battery resets the system ROM to its default
("Access
panel" on page 29).
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Removal and replacement procedures 47