Advertisement
Keeping your BT MultiJet 3000 clean
Cleaning the scanner g lass
Over time, the scanner glass may become dirty. To
ensure the best quality scans, wipe the scanner glass
with a soft clean cloth to remove dust or other debris.
Cleaning
Always use a dry cloth to clean the control panel and the
main body of the machine.
Caution
Never put water or spray glass cleaner directly on
the scanner glass. If you need to remove a stubborn
smudge, slightly dampen your cloth with water or
glass cleaner first, then wipe.
Print quality
If your print quality is not satisfactory, you may need to
align your print cartridges or clean the print nozzles. A
Test page can be printed from Print Properties or the
Control Program.
Installing or replacing print cartridges
Replacement ink car tridges
Black = MJ3000MS
Colour = MJ3000CS
Photo = MJ3000PS
The ink cartridges are available from 0800 590009
All manuals and user guides at all-guides.com
Make sure the Power is On
Lower the front cover. The ink cartridge carrier moves to
the centre loading position unless the printer is busy.
Remove the old print cartridge.
If you are installing a new cartridge, remove the sticker
and the tape from the bottom of the print cartridge.
Please note
For the best possible photo quality, print with
a photo and colour cartridge combination in
your printer.
Advertisement
