Advertisement
Pa per/Envelope options
Load up to
10 envelopes
10 g r eeting car ds,
index car ds, post-
car ds, or photo car ds
25 sheets of photo
pa per or photocar ds
20 sheets of
banner pa per
Note: Make sure you select
Banner or A4 Banner paper
size in the Printer Properties
10 tr anspar encies
100 sheets of
custom-sized pa per
25 ir on-on tr ansfer s
All manuals and user guides at all-guides.com
Make sure
• The print side is facing you and the paper guide is
adjusted against theside of the envelopes.
• The stamp location is in the upper left corner.
• The envelopes are loaded ver ticall y against the righ side of the rear input tray.
• The print side is facing you and the paper guide is adjusted against the side of the cards.
• The cards are loaded ver ticall y against the right side of the sheet feeder.
• The glossy or coated side is facing you.
• The paper guide is against the side of the paper.
• Place the banner paper behind the printer.
Then bring the unattached edge of the first page over the
printer and into the sheet feeder.
• The paper guide is against the side of the paper.
• The rough side of the transparency is facing you.
• The paper guide is against the edge of the transparencies.
• The print side is facing you and the paper guide is against the side of the paper.
• Your paper size fits within these dimensions:
- Width: 3.0 in. to 8.5 in. (76 mm to 215.9 mm)
- Length: 5.0 in. to 17.0 in. (127 mm to 432 mm)
• You load the iron-on transfers following the instructions on the package.
• The paper guide is against the side of the iron-on transfers
• Your BT MultiJet 3000 automatically prints a mirror image.
Advertisement
