Advertisement
Printing
Setting up and using your printer
Please note
The exact steps for printing may vary according to
the type of application software you have. Refer to
your software application user manual for detailed
steps on printing.
W hen you ar e r eady to print a document
fr om your PC scr een:
Check you have the right paper in the input tray and
replace if necessary. See Paper/Envelope options, and
Choosing settings for paper/envelopes.
Click on the File menu.
Select Print .
Click OK to start printing.
Or
Click on the Printer icon
Please note
If you are going to print colour photographs,
you can improve the print quality by replacing
the black cartridge with a special Photo cartridge.
All manuals and user guides at all-guides.com
The Control Program lets you monitor the job status,
install, align or clean cartridges, or change other options.
To open the Contr ol Pr og r am
The control program opens automatically when you print
a document. You can also open it manually.
At your PC
•
•
•
•
Four ta bs ar e availa ble:
Status:
Displays the current ink levels in the cartridges
Print Test Page
Options:
Run Minimised – stops the Control Program from
appearing each time a job is sent to the printer
Close Status at End of Job
Enable Sound Effects
Disable Printer to PC Communications
Enable Buffer Mode
Cartridges:
Install/Change Cartridge – provides
installation instructions
Clean Print Nozzles
Align Cartridges
About:
Software version
Using the Printer Control Program
Click on Star t
Select Settings
Select Printer s and a new screen opens.
Right click on the MJ3 printer icon and click on
MJ3 Contr ol Pr og r am.
Advertisement
