Advertisement
If you are using a Windows Dial-Up Networking
connection you will need to enter User and Password
details into Unimessage Pro even if these have already
been entered when the connection was defined.
Select which SMTP and POP3 email servers can be
accessed via the Unimessage Pro email driver.
Define the first email account and select whether it
should be System-wide or User specific.
A System-wide email account is only available to
Unimessage Pro Administrators and Supervisors and any
email retrieved using a System-wide email account is
added to the Network Inbox.
A User specific email account is available to the user
associated with it as well as all Administrators and
Supervisors. Any email retrieved using a User specific
email account is added to the user 's Received items
folder.
•
If the device you select or detect can support the
sending or receiving of fax messages, and you want
to use it to send or receive fax messages, you will
need to configure it.
•
When Unimessage Pro has collected sufficient
information it will create a shortcut to start
Unimessage Pro, which it will then run.
All manuals and user guides at all-guides.com
Please note
Additional devices can be defined clicking on File ,
then New, then Device at the PC to which the
device is connected.
You may only have the number of devices permitted
by your license active at any one time. You may be
able to upgrade your copy of Unimessage Pro to
enable you to use more devices at the same time if
your message traffic requires it. Please refer your
Unimessage Pro Administrator to the section on
Upgrading Unimessage Pro if required.
If you have installed Unimessage Pro onto a local
hard disk and want to use it from other PCs on a
peer-to-peer network remember to share the
Unimessage Pro folder with full access rights to all
other PCs that you want to be able to use
Unimessage Pro.
Before you can send email messages, you must
have defined an email driver and an email account.
If you configured Unimessage Pro for use with a fax
machine during installation, you must define a new
device and account for email messages.
Additional email accounts can be defined by clicking
, then New then Email account .
File
Advertisement
