Advertisement
To change the colour
The display shows the current setting, black (BLK) or
colour (CLR) .
Press Colour/Black to display the option
Colour/Black
Colour/Black
you want.
To make copies
You can make up to 99 copies.
Place the document to be copied on the scanner.
If you want to make more than one copy, press
Number of Copies
Adjust
you want. Hold down the button to change the
number of copies in steps of 5.
Press Star t . The page is scanned. You hear a
beep when scanning is finished.
Yes
You can scan another page, while your BT MultiJet 3000
is printing.
To stop copying
Press Stop . Display shows Cancel All Jobs?
Press Yes . The display will show Canceling
No
Jobs and copying is stopped and any paper
being printed is ejected.
Please note
If you have not scanned or copied any documents
within the previous 30 minutes, there is a delay of
about 50 seconds while the scanner warms up.
All manuals and user guides at all-guides.com
to set the number of copies
To set the pa per size
Your BT MultiJet 3000 is pre-set to scan A4 size for
copies. You can set it to copy different sizes of paper -
A4, B5 or LTR for Letter size.
Please Note
Setting the paper size determines the size of the
screen that is scanned, it does not control the
paper output.
Paper Size
Press Pa per/Size until the display shows the
option you want A4, B5 or LTR .
Press Star t or select another option.
Yes
Press Stop to return to standby and your original
paper size setting.
No
Sleep mode
If your BT MultiJet 3000 is not used for 30 minutes it
will enter and display SLEEP MODE . The printer will
continue to work but there will be a delay of
approximately 50 seconds to warm up before you
can scan or copy.
Advertisement
