Advertisement
Additional copier settings
These settings will remain active for a couple of minutes
after the last copy is printed. This allows you to continue
making copies with the same settings. If you stop
copying, they will revert to the default settings.
To adjust the contr ast
You can make your copies lighter or darker.
Press Zoom/Contr ast/Pa per Type until the
Adjust
Zoom
Contrast
display shows CONTRAST .
Paper type
Use the Adjust buttons to decrease or increase
Adjust
the contrast. A smaller bar gives a lighter copy, a
larger bar gives a darker copy.
Press Star t to begin copying or select another
Yes
option.
Press Stop to stop and return to standby, the new
setting will be retained. Press Stop again to
No
restore default setting.
To enlar ge or r educe the copy
Normally, your copies will be the same size as the
original document (100%). The zoom feature lets you
reduce or enlarge your copies from 25% to 400% of the
original size.
Press Zoom/Contr ast/Pa per Type until the
Adjust
display shows ZOOM 100%.
Zoom
Contrast
Paper type
All manuals and user guides at all-guides.com
Adjust
The quality of your copies will depend on the type of
paper you use. If you use glossy paper for photos or
transparencies, you should change the BT MultiJet 3000
paper setting.
To change the pa per setting
Zoom
Contrast
Paper type
Adjust
The Glossy paper type is only available when you have
set the printing mode to Colour. See page.
Use the Adjust buttons to decrease or increase
the size. Each press of the button changes the
zoom by 1%. Hold the button down to adjust the
size in steps of 10%.
Press Star t or select another option.
Yes
Press Stop to stop and return to standby, the new
setting will be retained. Press Stop again to
restore default setting.
No
paper
Press Zoom/Contr ast/Pa per Type until the
Adjust
display shows PAPER .
Use the Adjust buttons until the display shows
the type you want PLAIN , TRANSP ,
(for Transparency) or GLOSSY .
Press Star t or select another option.
Yes
Press Stop to stop and return to standby, the new
setting will be retained. Press Stop again to
No
restore default setting.
Using different types of
Advertisement
