Advertisement
Choosing settings for pa per/envelopes
Your BT MultiJet 3000 default settings are suitable for printing most documents on plain paper.
To change your printer settings for printing on speciality papers, use the following table:
Paper/envelope
Click printer
selection
properties tab, then:
Envelopes
Pa per
Gr eeting car ds,
Document/Quality
index car ds,
or postcar ds
Pa per
Photo, g lossy or
Document/Quality
coated pa per s
Pa per
Sheets of custom-
Pa per
sized pa per
Banner pa per
Pa per
Ir on-On tr ansfer s
Document/Quality
Pa per
Tr anspar encies
Document/Quality
Pa per
All manuals and user guides at all-guides.com
Make the following selection
Scroll and click to select the appropriate envelope size.
Note:
Many applications are designed to override the
envelope settings in Printer Properties.
Click to select Gr eeting Car d Stock .
Select the appropriate Paper Size setting.
Click to select Glossy/Photo Pa per .
• For the best possible photo quality, print with a photo
Notes:
and colour cartridge combination in your printer.
• When printing photos, remove each photo as it exits from the printer
and allow it to dry before stacking.
Select the appropriate Paper Size setting.
Click to select Custom . Enter the dimensions for your custom paper size.
Click to select Banner or Banner A4 .
Click to select Ir on-On Tr ansfer .
We recommend printing on plain paper before
Note:
printing on the actual iron-on transfer.
Select the appropriate Paper Size setting.
Click to select Tr anspar ency .
Select Nor mal 600dpi or High 1200 dpi Print Quality.
Please note:
When printing transparencies, remove each transparency
as it exits from the printer and allow it to dry before stacking.
Select the appropriate Paper Size setting.
Advertisement
