Advertisement
Installing the software
Befor e installation
Make sure you close all applications that are running,
including Outlook and Exchange.
•
Your copy of Unimessage Pro includes support for the
sending and receiving of email messages via SMTP
and POP3 services. You will need to know the address
of your outgoing SMTP and incoming POP3
email servers.
e.g. pop3.mailserver.com
smtp.mailserver.com
post.mailserver.com
You also need to know the POP3 email account name
and password and your own email address.
•
If you access the Internet via a Windows Dial Up
Network connection, make sure that you have
installed a suitable modem driver under Windows and
created the Windows Dial Up Network connection
before you install Unimessage Pro. You will need to
know the Windows Dial Up Network User Name and
Password in Unimessage Pro even if these are
already associated in Windows with the Dial
Up Network.
If installing Unimessa ge Pr o for use
with a networ k
When using Unimessage Pro on a network with a
separate file server, ensure that you install Unimessage
Pro onto the server.
All manuals and user guides at all-guides.com
When using the peer-to-peer network functions provided
by Windows® install Unimessage Pro onto the main PC's
hard disk then share the Unimessage Pro folder that it is
visible to all other Windows PCs where you want to be
able to use Unimessage Pro. You must grant full access
to the shared folder – read only access is not sufficient.
To install the BT MultiJet 3000 Driver s and
Unimessa ge Pr o softwar e
Insert the BT MultiJet 3000 CD into the CD-ROM drive.
The installation should start automatically.
If the CD does not run, you can start it manually.
•
•
•
•
•
Click Star t
Click Run .
Type D:\setup.exe (where D is the drive letter for
your CD-ROM drive, usually d, e, or f)
Click OK .
Double click Install BT MultiJet 3000 Driver s
and Unimessa ge Pr o
.
Advertisement
