Password - Pepperl+Fuchs KF GUT-(EX)1.D Series Manual

Temperature converter with trip relays KF**-GUT-(Ex)1.D
Editing device data: Parameterisation mode control panel
By pressing the ESC key (perhaps several times), you can return to the display mode from every menu
item of the parameterisation mode. If 10 minutes elapse without a key being pressed in
parameterisation mode, the device switches automatically back to display mode.

8.1.2 Password

You can use a password to protect the parameterisation from unauthorised modifications (see
section 8.7; inactive in the GUT default setting).
If the password protection is active, the various settings performed in the parameterisation mode may
be viewed before the password entry; however, modifications are not possible in this way. The first
time an attempt is made to modify a setting, the device automatically displays a window for entering
the password.
After each transition from the display mode to the parameterisation mode, the password must be
entered once.
The password cannot be modified and is 1234.
To enter the password:
Modificat
ion
attempt
Release parameter ← OK, value 1234
*The value changes stepwise when actuating the ! or " key. When you hold down the ! or " key,
the setting "scrolls" to higher or lower values.
Subject to reasonable modifications due to technical advances.
18
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
automatic for password entry →
Parameter still protected ← ESC
Value 0, flashing
ESC ↑
!, " *: ↓
OK, wrong value
new value, flashing
Copyright Pepperl+Fuchs, Printed in Germany
↑