Thermocoupler (Tc) - Pepperl+Fuchs KF GUT-(EX)1.D Series Manual

Temperature converter with trip relays KF**-GUT-(Ex)1.D
Editing device data: Input

8.2.3 Thermocoupler (TC)

The illustrations below show menu levels subordinate to the TC menu item. Menu items of the lowest
menu level are displayed in a bold frame.
If the TC sensor type has been selected (On) and you press the OK key, the program guides you from
the TC menu item to the Type menu item. If you select again the TC sensor type (see section 8.2.1)
and press the OK key twice, the Type menu item is available at once.
TC (On)
By means of the Pepperl+Fuchs PACTware™ parameterisation software, it is possible to enter an
individual characteristic for a special thermocouple. Afterwards, you can select this characteristic via
User.
Subject to reasonable modifications due to technical advances.
24
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
—— Type
Continue next page
—— TC-B
TC-E
TC-J
•
•
•
TC-R
TC-S
TC-T
User (see below)
Copyright Pepperl+Fuchs, Printed in Germany