Default Settings - Pepperl+Fuchs KF GUT-(EX)1.D Series Manual

Temperature converter with trip relays KF**-GUT-(Ex)1.D
Editing devide data: Default settings
Reset: If Yes flashes and you press the OK key, the GUT settings are reset to the factory settings
except for the sensor type (see section 8.8, for the selection of the sensor type see section 8.2.1). All
inputs (except for the sensor type) which you have been performed in the parameterisation mode at
any time are lost.
Power frequency: Specify the frequency of the supply network here. This approach is the best
method to avoid that this power frequency affects the GUT (also important for DC devices).
8.8

Default settings

Sensor type RTD
Parameter
Type
Measuring type
Unit
Sensor type TC
Parameter
Type
CJC
Red. TC
Unit
Subject to reasonable modifications due to technical advances.
42
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Default settings
Pt100
3-wire
°C
Default settings
TC-K
Internal
Off
°C
User settings
User settings
Copyright Pepperl+Fuchs, Printed in Germany