Table of Contents
Advertisement
The representation is shifted to the left compared to the previous page.
CJC (see below) ——
Red. TC (8.2.4) ——
* in the selected unit, such as °C (see section 8.3)
CJC: The selected compensation type (internal or external) is marked with On. To select another
compensation type, first call it up using the ! and " keys. Next, press the OK key twice. After the first
OK you can press the ESC key to cancel.
For an internal cold junction compensation, you require the terminal K-CJC (see section 6.2) instead
of the normal terminal 1 ... 3 as an accessory.
If the External compensation type has been selected (On) and you press the OK key, the program
guides you from the External menu item to the Temp menu item. If you select again the External
compensation type (see above) and press the OK key twice, the menu item Temp is available at once.
Enter the external reference temperature here.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Temperature converter with trip relays KF**-GUT-(Ex)1.D
internal
external
On/Off
Max. deviation
Editing device data: Input
——
Temp
——
On
Off
——
1 to 250 *
Copyright Pepperl+Fuchs, Printed in Germany
——
-350 ... 350 *
25
Advertisement
Table of Contents
