6.3
GUT front side
The following elements can be found on the GUT front side:
•
LED ERR (red) for display of
− a sensor fault (flashes red)
− of a device malfunction (continuously red)
•
Green PWR LED to indicate the presence of the supply voltage
•
LED OUT 1 (yellow) to indicate relay 1 active
•
LED OUT 2 (yellow) to indicate relay 2 active
•
Serial RS 232 interface for the connection of a PC for the
parameterisation and diagnosis of the GUT with PACTware™
•
a display to show measurement values and malfunctions and for
display in the parameter setting mode
•
four keys for the parameterisation of the GUT
! (Up)
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Temperature converter with trip relays KF**-GUT-(Ex)1.D
" (Down)
ESC (Escape)
Mounting and connection
OK
Copyright Pepperl+Fuchs, Printed in Germany
15