3M Matic 800at Instructions And Parts List page 96

Specif cations
Tape:
1.
For use with Scotch
Tape Width:
2.
36mm or 1-1/2 inches minimum to 48mm [2 inches] maximum.
Tape Roll Diameter:
3.
Up to 405mm [16 inches] maximum on a 76.2mm [3 inch] diameter core.
(Accommodates all system roll lengths of Scotch
Tape Application Leg Length - Standard:
4.
70mm ± 6mm [2-3/4 inches ±1/4 inch]
Tape Application Leg Length - Optional:
50mm ± 6mm [2 inches ± 1/4 inch] (See "Adjustments – Tape Leg Length.")
Box Size Capacities:
5.
For use with center seam regular slotted containers.
Minimum
Length –
Height –
Width –
When upper and lower taping heads are used on "3M-Matic" case sealers, refer to the respective instruction
manual specifi cations for box weight and size capacities.
Operating Rate:
6.
Conveyor speeds up to 0.40m/s [80FPM] maximum.
Operating Conditions:
7.
Use in dry, relatively clean environments at 5° to 40°C [40° to 105°F] with clean dry boxes.
Important – Taping heads should not be washed down or subjected to conditions causing moisture
condensation on components.
Taping Head Dimensions:
8.
Length
Height
Width
Weight
2" STD Taping Head
pressure-sensitive fi lm box sealing tapes.
®
Maximum
150mm [6 inches]
120mm [4-3/4 inches] (most "3M-Matic" Case Sealers)
90mm [3-1/2 inches] (with optional 2 inch leg length)
115mm [4-1/2 inches]
– 457mm [18 inches]
– 560mm [22 inches] (with tape drum)
– 105mm [4-1/8 inches] (without mounting spacers)
– Packaged: 7.7kg [17 lbs.] Unpackaged: 6.7kg [15 lbs.]
® fi lm tapes.)
(Specifi cations continued on next page.)
6
Unlimited
Limited by
Case Sealer
2010 May