Replacement Parts Illustrations And Parts List - 3M Matic 800at Instructions And Parts List

Replacement Parts Illustrations and Parts Lists
AccuGlide™ 2+ STD 2 Inch Upper Taping Head, Type 10500
AccuGlide™ 2+ STD 2 Inch Lower Taping Head, Type 10500
Refer to the Taping Head Assemblies Figure to fi nd all the parts illustrations identifi ed by f gure numbers.
1.
Refer to the fi gure or fi gures to determine the individual parts required and the parts reference number.
2.
The replacement parts list, that follows each illustration, includes the part number and part description
3 .
for the parts in that illustration.
Note – The complete description has been included for standard fasteners and some commercially
available components. This has been done to allow obtaining these standard parts locally, should
the customer elect to do so.
Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information" for
4.
replacement parts ordering information.
IMPORTANT – Not all the parts listed are normally stocked items. Some parts or assemblies shown
are available only on a special order basis. Contact 3M/Tape Dispenser Parts to
confi rm item availability.
2" STD Taping Head
20
2010 May