Sensor Data Logging; Pressure And Elevation - Hach 5740sc User Manual

5.3 Sensor Data Logging

5.4 Pressure and Elevation

Elevation in feet Barometric pressure in mm Hg
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
5500
The sc1000 provides a data log for each sensor.
1. Tap the bottom-left of the screen to display the pop-up toolbar and press
2. From the Main Menu, select SENSOR SETUP and press
3. Highlight the appropriate sensor if more than one sensor is attached and
press .
ENTER
4. Select CONFIGURE and press
5. Select LOG SETUP and press
6. Select from the logging interval options from the list box and press
Note: If the barometric pressure from
combination with this value must be 0 feet.
Table 5 can be used to estimate the true barometric pressure at certain elevations. The
correspondence is based on the assumption that at sea level the barometric pressure is
760 mm Hg. After determining the barometric pressure from the table or obtaining it from a
local weather service, enter this value into the instrument.
Table 5 Elevation Barometric Pressure
760
746
733
720
708
695
683
671
659
647
635
624
.
ENTER
.
ENTER
Table 5 is entered in the meter, the altitude entered in
Elevation in feet Barometric pressure in mm Hg
6000
6500
7000
7500
8000
8500
9000
9500
10000
10500
11000
—
sc1000 Operation
客服：400 688 9809
MAIN MENU
.
ENTER
ENTER.
613
601
590
579
568
559
548
538
527
517
506
—
.
27