Sensor Setup; Changing The Sensor Name; Sensor Data Log; Sensor Data Logging - Hach 5740sc User Manual

4.2 Sensor Setup

4.2.1 Changing the Sensor Name

Step Select
1
2
3
4
5
6

4.2.2 Sensor Data Log

4.2.2.1 Sensor Data Logging

Step Select
1
2
3
2
4
2
4
2
5
When a sensor is initially installed, the serial number of the sensor will be displayed as the
sensor name. To change the sensor name refer to the following instructions:
Highlight the appropriate sensor if more than one sensor is attached.
Select character to edit (shown in brackets).
The data logs store the measurement data at selected intervals. The data logs are stored
in a packed binary format and the event logs are stored in a CSV format. The logs can be
downloaded through the digital network port, service port, or the IrDA port. DataCom is
needed for downloading logs to a computer.
Scroll through the displayed options.
Scroll through the displayed options.
Menu Level/Instructions
MAIN MENU
SENSOR SETUP
CONFIGURE
EDIT NAME
Scroll to appropriate character.
Menu Level/Instructions
MAIN MENU
SENSOR SETUP
CONFIGURE
LOG SETUP
SENSOR INTERVAL
TEMP INTERVAL
SET INTERVAL
sc100 Operation
客服：400 688 9809
Confirm
—
—
Confirm
—
15