Table of Contents
Advertisement
sc1000 Operation
Figure 8
Main Menu
1
1.
Display Area
2.
BACK
3.
FORWARD
4.
–confirms the entry or selection.
ENTER
5.
–changes to the display of measured values. The pop-up toolbar cannot open from the menu window. To view the
HOME
Main Menu from this display, touch the Home button and then the bottom of the screen.
6.
–scrolls up
UP
7.
–scrolls down
DOWN
5.1.1.3 Navigating the Menu Windows
24
2
3
MENU
SENSOR STATUS
SENSOR SETUP
SYSTEM SETUP
TEST/MAINT
To view a menu item, touch the menu item or use the
item. The menu item remains highlighted for approximately 4 seconds after it is selected.
To view the highlighted command, select the area to the left of the menu item or select the
button.
ENTER
A "+" next to a menu command indicates there is a submenu. Touch the "+" to view the
submenu. An "i" next to a menu command indicates it is information only.
If a menu item is editable, highlight the item and touch the far-left part of the menu item
until it is highlighted and press
displayed to change an entry
(Figure 11 on page
26).
Messages are displayed in the message window
If an entry is incorrect, repeat the entry with the correct values. If the entry is outside the
working range, a correction to the entry is made automatically.
4
5
UP
or double-tap the highlighted item. A keypad will be
ENTER
(Figure 10 on page
25) or a list box will be displayed
(Figure 12 on page
客服：400 688 9809
6
7
and
keys to highlight the
DOWN
26).
Advertisement
Table of Contents
