Section 4 Operation; Using An Sc Controller; Sensor Setup; Sensor Data Logging - Hach NO3D sc User Manual

Section 4

4.1 Using an sc controller

4.2 Sensor setup

4.3 Sensor data logging

4.4 Sensor diagnostics menu

SELECT SENSOR
ERROR LIST
WARNING LIST
Operation
Before using the sensor in combination with an sc controller, refer
to the controller user manual for navigation information.
When a sensor is installed for the first time, the serial number of the
sensor is displayed as the sensor name. The sensor name can be
changed as follows:
1. Select
2. From the Main Menu, select
3. Select the appropriate sensor if more than one sensor is
4. Select
5. Select
The sc controller provides a data log and an event log for each
sensor. The data log contains the measured data at selected
intervals. The event log contains a large number of events that
occur on the instruments, such as configuration changes, alarms
and warnings, etc. The data log and the event log can be exported
to CSV format. For information on downloading the logs, refer to the
sc controller user manual.
Displays all actual error codes.
Displays all actual warnings.
.
MAIN MENU
attached and confirm.
and confirm.
CONFIGURE
and edit the name. Confirm or cancel to
EDIT NAME
return to the Sensor Setup menu.
and confirm.
SENSOR SETUP
19