Sensor Setup; Changing The Sensor Name; Sensor Data Logging; Sensor Or Temperature Data Logging - Hach 8362sc User Manual

4.2 Sensor Setup

4.2.1 Changing the Sensor Name

Step Select
1
2
3
4
5 —
6

4.3 Sensor Data Logging

4.3.1 Sensor or Temperature Data Logging

Step Select
1
2
3
4
5
6
7
When a sensor is initially installed, the serial number of the sensor will be displayed as the
sensor name. To change the sensor name refer to the following instructions:
Highlight the appropriate sensor if more than one sensor is attached.
The data logs store the measurement data at selected intervals. The event log stores a
variety of events that occur on the devices such as configuration changes, alarms, and
warning conditions. The data logs are stored in a packed binary format and the event logs
are stored in a CSV format. The logs can be downloaded through the digital network port,
service port, or the IrDA port. DataCom is needed for downloading logs to a computer.
Highlight the appropriate sensor if more than one sensor is attached
Select SENSOR INTERVAL or TEMP INTERVAL
Choose from the displayed options.
Menu Level/Instructions
MAIN MENU
SENSOR SETUP
CONFIGURE
EDIT NAME
Select the character to edit.
Choose the appropriate digit.
Menu Level/Instructions
MAIN MENU
SENSOR SETUP
CONFIGURE
LOG SETUP
sc100 Operation
Confirm
—
—
Confirm
—
19