Location Of Brake Release Switch - JLG 1230ES Operation And Safety Manual

Brake Release Switch
NOTE: If the machine's batteries are completely depleted of elec-
trical charge the brakes cannot be released electrically.
The brakes must be released mechanically, see Section 4 -
Manual Brake Release.
DO NOT MANUALLY DISENGAGE THE BRAKES UNLESS THE MACHINE
IS SETTING ON A LEVEL SURFACE OR THE MACHINE IS FULLY
RESTRAINED.
1. The brake release switch (1) is located on the lower rear
panel (2) on the machine.
2. The machine must be powered ON to GROUND CONTROL
MODE at the Platform/Off/Ground Selector Switch on the
Ground Control Station (3) to operate the brake release
switch.
3121221
SECTION 3 - MACHINE CONTROLS AND INDICATORS
Figure 3-6. Location of Brake Release Switch
– JLG Lift –
(Rear of Machine)
3-7