JLG 1230ES Operation And Safety Manual page 38

SECTION 3 - MACHINE CONTROLS AND INDICATORS
1. System Distress Indicator - This indicator will light up with a
fault flash code that indicate where a problem within the sys-
tem exists.
2. Battery Discharge Indicator (BDI) - This set of lights is
designed to let the operator know the condition of the batter-
ies.
3. Tilt Indicator Warning Light and Alarm - A red warning light
on the control panel illuminates and an audible alarm sounds
when the chassis is at or beyond the permitted amount of
slope.
IF THE TILT INDICATOR WARNING LIGHT/ALARM IS ACTIVATED WHEN
PLATFORM IS RAISED LOWER PLATFORM AND DRIVE TO A FIRM
LEVEL SURFACE.
3-10
4. Lift/Drive Select - This toggle switch is used to select either
drive or lift. After selecting a function, the controller must be
moved in the proper direction in order to activate that func-
tion. The function must be selected with the joystick in the
neutral position. Otherwise, the function select will not occur.
5. Horn - This push-button switch, when activated, permits the
operator to warn jobsite personnel when the machine is
operating in the area.
– JLG Lift – 3121221